background image

FCC/IC Compliance

 The equipment has been tested and found to comply with the limits for a class B 

digital device, pursuant to part 15 of the FCC Rules (ICES-003), which are designed to protect against 

harmful interference in a residential installation. The equipment could radiate radio frequency energy 

and this might cause harmful interference to radio communications if instructions are not followed 

when installing and using the equipment. But there is no guarantee that interference will not occur in a 

particular installation. If this equipment causes harmful interference to radio or television reception, the 

following measures might resolve the issues:

A)

 Relocate the receiving antenna and keep it well away from the equipment.

B)

 Consult the dealer or an experienced radio / TV technical for help.

*Changes or modifications not expressly approved by the party responsible for compliance may

void the user’s authority to operate the equipment.

Federal Communication Commission Interference Statement

FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

Non-modification Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the 

user's authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. 

This equipment should be installed and operated with minimum distance 20cm between the radiator & 

your body.

1.2 Radio Interference Statement

1. Important Safety Instructions

3

Содержание DPI-208



























Отзывы: