9
Maintenance Guide
Warning:
Always unplug the treadmill from the power supply before
servicing the product.
● Use a cloth to clean the surface of the product.
● Thorough cleaning will extend the life of the machine.
● A thorough cleaning will extend the life of the machine.
● Regularly remove dust to keep the parts clean and sweep the exposed parts
of the running belt on both sides, which will reduce the accumulation of
impurities on the running belt. Keep the sneakers clean to avoid carrying
foreign objects under the running belt and wearing the running board and belt.
The surface of the treadmill must be cleaned with a soapy damp cloth. Be
careful not to splash water on the electrical components and under the
treadmill.
● Check and lock all parts of the treadmill frequently, replace those defective
parts and/or leave the equipment unused until restoration.
1.Adjust the running belt
If you are using the treadmill, the running belt slippage or not smooth, you can
adjust the running belt elasticity to improve.
There are two functions for running adjustment: tightness adjustment and
running belt center position adjustment. The running belt has been adjusted at
the factory, but after use, the running belt will be stretched, and it will deviate
from the center position, causing the running belt to rub against the pedal edge
and the rear cover and damage it. It is normal for the running belt to stretch
during use.
When the product is running at no load, the running belt will have a side
deviation of not more than 5mm is a normal phenomenon.
Adjustment of the running belt method (the picture is for reference only,
subject to the real thing)
◆
The running belt deviates to the left
tight
