![background image](http://html1.mh-extra.com/html/yoshitake/trap-star-tsf-11at/trap-star-tsf-11at_product-manual_914687017.webp)
16
8.7 Parts replacement procedure
Part name
Disassembly
(See 8.5.)
Reassembly
(See 8.6.)
Cover gasket
Procedure 1
Procedures 6 to 7
Float (P) assembly
Procedures 1 to 2
Procedures 4 to 7
Cock assembly
Procedures 1 to 4
Procedures 1 to 8
Screen
Procedure 1
Procedures 5 to 7
[Procedure 8]
With applying spanner to the cock (width across flat: 9 mm), adjust the
direction of the name plate. After adjustment, tighten the nut with torque
wrench (width across flat: 22 mm) with torque of 35 N
・
m.
* If the name plate is not in correct direction, it hampers proper
operation. See No.4, “6.2 Precaution for installation” on Page 6 for the
adjustment procedure.
Torque wrench
(width across flat: 22 mm)