![background image](http://html1.mh-extra.com/html/yoshitake/trap-star-tsf-11at/trap-star-tsf-11at_product-manual_914687016.webp)
15
[Procedure 7]
[Procedure 6]
Install the cover gasket to the cover. Make the oval-shaped holes on
the cover and on the cover gasket in the same position. Make sure to
use a new cover gasket. Apply lubricant agent to the cover gasket
(Recommendation: SOLVEST No.110 paste, STT Inc.).
Install the cover to the body, making the oval-shaped holes on the cover
and on the body in the same position. Tighten the bolt with torque
wrench (width across flat: 19 mm) with torque of 45 N
・
m.
* Do not use impact wrench to tighten the bolt. Using it may cause
unevenly tightened bolt or damaged gasket, resulting in outside
leakage.
Cover
Body
Oval-shaped
hole
Make the oval-
shaped holes in the
same position.