19
[Procedure 7]
[Procedure 5]
[Procedure 6]
Attach the screen to the body. The screen can be inserted from either
end.
Install the cover gasket to the cover. Make the oval-shaped holes on
the cover and on the cover gasket in the same position. Make sure to
use a new cover gasket. Apply lubricant agent to the cover gasket
(Recommendation: SOLVEST No.110 paste, STT Inc.).
Install the cover to the body, making the oval-shaped holes on the cover
and on the body in the same position. Tighten the bolt with torque
wrench (width across flat: 19 mm) with torque of 45 N
・
m.
* Do not use impact wrench to tighten the bolt. Using it may cause
unevenly tightened bolt or damaged gasket, resulting in outside
leakage of condensate or steam.
Oval-shaped
hole
Make the oval-
shaped holes in the
same position.
Cover
Body