1
1. Usage of the product
The TSF-10, TSF-10F, TSF-11, and TSF-11F can discharge condensate effectively without retention, and
realize energy saving steam system without steam loss. In addition, incorporated thermostatic air vent
discharges air inside the piping and shortens warming-up time. So, the product is suitable for steam equipments
used in various industries such as air-conditioning equipment, hot-water supply equipment, plant, and food.
2. Features
1.
With turning the cock, it is possible to meet all flow directions (360 degrees) including horizontal or vertical
installation. Flow direction can be switched easily without disassembly such as detaching the cover.
2.
Since the main parts are installed on the cover and it is possible to disassemble the cover with the body
installed on the piping, inspection and parts replacement can be conducted easily.
3.
Compared to mechanical steam traps such as conventional float type or bucket type, the lower part
(dimension from the connection to the bottom) of the product is shorter. So, the product can be installed in
a low place such as condensate piping on low-floor equipment.
3. Specifications
Model
TSF-10
TSF-10F
TSF-11
TSF-11F
Nominal size
15A-25A
25A-50A
Application
Steam condensate
Working pressure
(Maximum working
differential pressure)
TSF-1
-5: 0.01-0.5 MPa (0.5 MPa)
TSF-1
-10: 0.01-1.0 MPa (1.0 MPa)
TSF-1
-21: 0.01-2.1 MPa (2.1 MPa)
Max. temperature
220°C
Material
Body
Ductile cast iron
Float
Stainless steel
Valve,
valve seat
Stainless steel
Connection
JIS Rc screwed
NPT screwed
JIS 10K FF flanged
JIS 20K FF flanged
JIS Rc screwed
NPT screwed
JIS 10K FF flanged
JIS 20K FF flanged
Flow direction
All directions *
* For installation posture, see 3 of “7.2 Precaution for installation“ on Page 8.
Caution
Please confirm that the indications on the product correspond with the specifications
of the ordered product model before use.
* If they are different, do not use the product and contact us.
