YO Airflow Pro
User guide
v1.0
page 12/26
3. The device is on. Screw it back together
4. Insert the silicone tubing onto the sensor inputs.
Figure 10
Connecting silicone tubing instructions.
Important!
The sensors must be placed according to the following diagram, i.e. the sensor measuring the higher
pressure must be placed on the right side and the one measuring the lower pressure on the left side:
Figure 11
Connecting silicone tubing side view instructions.
Important to avoid breaking the device!
In case of removing silicone tubes it is necessary to cut off the tubes from the connectors i.e. with a
sharp knife. First tubes must be cut off on the edge of the sensor with high or low pressure, then cut
off the rest of the silicon tube located along the black sensor. Then take off the rest of the silicon tube
gently without breaking the sensor.
REV 1.0
