YOSensi Airflow Pro2, Руководство пользователя

Страница: 20 / 23

YO Airflow Pro
2
User guide v1.0 page 20/23
Figure 14 Node LoRa type configuration form.
6. When data is received by the server, you’ll notice that the ‘Last Seen’ column (‘NODES LIST’
tab) status changes from ‘never’ to ‘a few seconds ago’.
7. Open charts by clicking on the ‘OPEN’ button in Dashboard columns or by entering the
node’s ‘DETAILS’ tab (‘Node Name’ column link) and clicking ‘CHARTS’.
Payload description
If you want to connect to your own server you have to decode the payload specific to each device. To
do this you need a payload decoder which can be downloaded from
Payload decoder . Extended
documentation of the protocol can be found at Payload description .. An exemplary payload produced
by YO Airflow Pro 2 is presented below with division into each measurement marked together with
decoded values whose interpretation is described in the Payload description document.
Example of YO Airflow Pro 2 payload with description:
02:00:00:00:08:00:01:11:ce:0d:00:01:00:f0:10:00:00:42:41:00:05:fe:f5:00:60:00:bd:15:00:01:08:
ab:0d:00:11:25:00:f7
Payload header First measurement (battery voltage)
0x02 0x00 0x00 0x00 0x08 0x00 0x01 0x11 0xCE
ver = 2 cnt = 0 pct [s] = 0
type = 2
prec = 0
md [s] = 0
addr_len = 0
meas_len = 2
val = 4558
(4558 [mV])
REV 1.0 www.yo sensi . io