OPERATION
This section will explain the function of
NOTE
The fireplace may emit a slight, harmless odor when first used. This odor is a normal
condition caused by initial heating of internal
•
Control Panel Operation
A. Buttons and indicators
There are four buttons on the remote controller, and four on the control panel of the
pair of buttons with the same label perform the same function, the back of it is manual switch near
the power cord:
<ON/OFF> button is power switch of the
<DIMMER> button is used to adjust the brightness of simulated flame and logs;
<LOW> button turns the fireplace
already working at low
<HIGH> button turns the
already working at high
There are four indicators on the control panel:
is the power indicator, it light up when the
the fireplace is turned off;
indicates the status of the simulated flame and logs.
indicates the fireplace
indicates the fireplace
The red window on the control panel of
This section will explain the function of each convenient control.
may emit a slight, harmless odor when first used. This odor is a normal
condition caused by initial heating of internal heater parts and will not occur again.
re are four buttons on the remote controller, and four on the control panel of the
pair of buttons with the same label perform the same function, the back of it is manual switch near
<ON/OFF> button is power switch of the fireplace;
<DIMMER> button is used to adjust the brightness of simulated flame and logs;
fireplace on and switches it to low-power status.
already working at low-power status, to push this button will turn the
<HIGH> button turns the fireplace on and switches it to high-power status.
already working at high-power status, to push this button will turn the
There are four indicators on the control panel:
icator, it light up when the fireplace is working, and turned out when
is turned off;
indicates the status of the simulated flame and logs.
fireplace is working in low-power status;
fireplace is working in high-power status.
The red window on the control panel of fireplace is the eye of receiver, do not cover.
8 |
P a g e
may emit a slight, harmless odor when first used. This odor is a normal
parts and will not occur again.
re are four buttons on the remote controller, and four on the control panel of the fireplace, each
pair of buttons with the same label perform the same function, the back of it is manual switch near
<DIMMER> button is used to adjust the brightness of simulated flame and logs;
power status. If the fireplace
power status, to push this button will turn the fireplace off.
power status. If the fireplace
power status, to push this button will turn the fireplace off;
is working, and turned out when
is the eye of receiver, do not cover.
