6 |
P a g e
INSTALLATION
This section provides step-by-step instructions of your fireplace.
WARNING
The outlet must be 15A/120V.
CAUTION
Do not remove the four rubber feet at the bottom of the fireplace or install the fireplace
directly on soft surfaces, which may restrict air circulation. Otherwise, it may cause a risk of
fire or damage.
1.
Select a suitable location which is not susceptible to moisture, safe, dust free, away from high
traffic and away from things that may catch fire or block openings such as drapes, furniture, etc.
NOTE
It is a good idea to place your fireplace near an existing outlet; for ease of electrical hook up.
2.
Place the Electric fireplace unit in the desired location to see how it will look in the room.
3.
If there is no 15A/120V outlet near the desired location, install a new one.
WARNING
Do not attempt to wire you own new outlets or circuits. To reduce the risk of fire, electric
shock or injury to persons, always use a licensed electrician.
4.
Make sure the fireplace is switched off (refer to operation instruction section).
5.
Plug the fireplace into a 15A/120V outlet. Wiring the cord along the corner of wall.
Plug must be accessible after installation.
