10 |
P a g e
MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire,
electric shock to persons or damage.
Light Bulb Replacement
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and
detail of the log exterior disappears.
WARNING
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid burning of
skin. Except the light bulb replacement, any other servicing should be performed by an
authorized service representative.
I.
Bulb Requirements
Quantity of 2 or 3 Incandescent candelabra bulbs with an E-12 small socket base, rating
voltage 120 volts, rating power 40 watts.
CAUTION
Do not exceed 40 watts per bulb
II.
Operation
1.
Open the light bulb area:
The light bulb area is on the back of electric fireplace, see “E”. There are 6 screws on it.
Loosen the screw by some tool, and then you can open it. (Right figure)
2.
Examine the bulbs to determine which bulbs require replacement.
3.
Remove old bulb and replace a new one. Hold the socket while unscrewing or screwing
bulbs. (Right figure)
4.
Replace the cover of light bulbs.
5.
Done.
