B a t t e r y P o w e r e d S t a g e L i g h t i n g
LP-LED/M
1
LP-LED2M
The Yorkville Sound LP-LED2M is a compact and dual powered (battery and AC) lighting system. The
LP-LED2M uses 2 lighting fixtures, called pods, mounted on a stand-mountable bar/controller. The bar
houses the user controls, the connectors for a separate controller, the power supply, the battery and
internal charger, and mounting options. Each light pod uses 4 very high-power multi-die LED emitters
that comprise of a red, a green, a blue and a white die. The addition of the white die provides a much
more complete light spectrum; more accurate color rendering of the objects and/or people illuminated.
The light output of each pod is roughly equivalent to 300-watt bulbs with gels. At a distance of 6 feet, the
light beam has a diameter of 3 feet. The diameter of the light at 12 feet is 5 feet. The light is mixed in the
lens so that the mixed light color is visible when looking at the lens. Each pod may be adjusted in 2 axes.
The LP-LED Bars may be used in several ways:
1. Stand alone, no separate controller is required
2. Linked to other LP-LED Bars with one as master
3. With a Yorkville Lighting Controller. The Yorkville Sound LP-C12 and LP-C4 controllers
allow for more functionality than the LP-LED Bars on their own. The older Yorkville Sound
LP-608 can also be used but has limited functionality (see more detailed description below).
When a Yorkville Sound Color Controller is used, the controls on the LP-LED Bars become inactive
except for the Brightness Control.
4. With a DMX™ Controller. The DMX™ signals pass through internal integrated DMX™
processing via a 3-pin standard XLR. Five separate modes are available with DMX512
addressing standard protocol.
5. Bluetooth Smart™ device. Using our dedicated Android and iOS apps via any Bluetooth
Smart™ enabled device. Effects and full manual RGBW color controls are available, along
with extended Bluetooth™ effects such as strobe.
Function Control & Stand-Alone Operation
The Function Control allows you to set the basic operation of the LP-LED Bars. It allows you to power the unit
on, off, choose
Bluetooth™ operation
or set a manual setting. When an LP-LED Bar is operated by itself (stand-
alone) there are a number of modes which are set by the Function control:
• ALL ON Lamp Color control (5 identical positions)
• Bluetooth™ operation 4 separate settings (A, B, C, D)
• Chase (5 speeds)
• Single Color fade (6 speeds)
• Multi Color fade (4 speeds)
• Audio effects via internal microphone (4) or via ¼-inch jack,
triggering (4) (inserting a jack bypasses the internal microphone)
