![background image](http://html2.mh-extra.com/html/york/tiwm006b21s/tiwm006b21s_installation-and-maintenance-manual_4192713005.webp)
P5417052
1
● For details on wiring between the indoor unit and the outdoor unit, refer to the "Installation and Maintenance
Manual" for the outdoor unit.
● For details on the optional controller, refer to the "Installation and Maintenance Manual" for that optional
controller module.
● For details on each optional part, refer to the "Installation and Maintenance Manual" for each optional part.
● For central controller, refer to the "Installation and Maintenance Manual" for the central controller.
1. Introduction
Forward this information, and the warranty to all installers and users.
Ask end users to maintain copies for future reference.
(Refrigerant Piping Work)
(Electrical Wiring Work)
(Ref. Charge Work)
(Test Run)
(User)
2. Safety Instructions
Signal Words
Indicates a hazardous situation that, if not avoided, could result in death
or serious injury.
Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
Indicates information considered important, but not hazard-related (for
example, messages relating to property damage).
General Precautions
To reduce the risk of serious injury or death, read these instructions
thoroughly and follow all warnings or cautions included in all manuals
that accompanied the product and are attached to the unit.
Refer back to
these safety instructions as needed.
● This system should be installed by personnel certified by Johnson Controls, Inc. Personnel must be
qualified according to local, state and national building and safety codes and regulations. Incorrect
installation could cause leaks, electric shock, fire or explosion. In areas where Seismic ‘’Performance
requirements are specified, the appropriate measures should be taken during installation to guard
against possible damage or injury that might occur in an earthquake if the unit is not installed
correctly, injuries may occur due to a falling unit.
●
Use appropriate Personal Protective Equipment (PPE), such as gloves and protective goggles and,
where appropriate, have a gas mask nearby. Also use electrical protection equipment and tools suited
for electrical operation purposes. Keep a wet cloth and a fire extinguisher nearby during brazing. Use
care in handling, rigging, and setting of bulky equipment.
●
When transporting, be careful when picking up, moving and mounting these units. Although the
unit may be packed using plastic straps, do not use them for transporting the unit from one location
to another. Do not stand on or put any material on the unit. Get a partner to help, and bend with
your knees when lifting to reduce strain on your back. Sharp edges or thin aluminum fins on the air
conditioner can cut fingers, so wear protective gloves.
Read following sections carefully before installing this product.
Read over the "Installation and Maintenance Manual" for the outdoor unit as well.
Содержание TIWM006B21S
Страница 51: ......
Страница 52: ...2017 Johnson Controls Inc P5417052 Code No LIT 12012615 Issued November 2017...