998659-YIM-C-0614
6
Johnson Controls Unitary Products
inspected to assure that operation of the unit during
construction has not contaminated the unit.
NOTE:
Should the unit be used during the construction phase
the standard limited warranty provisions go into effect
once the unit is placed into operation.
Figure 4: Predator
®
Component Location
The
Simplicity
® control board used in this product will
effectively operate the cooling system down to 0°F when
this product is applied in a comfort cooling application
for people. An economizer is typically included in this
type of application. When applying this product for
process cooling applications (computer rooms,
switchgear, etc.), please reference applications bulletin
AE-011-07 or call the applications department for
Unitary Products @ 1-877-UPG-SERV for guidance.
Additional accessories may be needed for stable
operation at temperatures below 30° F.
Compressor #1 Access
(High-Eff Compressor)
Toolless
Door Latch
Side entry power
and control wiring
knockouts
Slide-out drain pain
with steel 3/4” NPT,
Female Connection
Belt-drive
blower
motor
Condenser
section
Filter drier (solid core)
Filter access
(2” or 4” filter options)
Disconnect location
(optional disconnect switch)
Compressor #2
Access (High-Eff
Compressor)
Simplicity
TM
Control
board w/screw connec-
tors for T-stat wiring and
network connection
Roof curbs in eight- and
fourteen-inch heights. Roof
curbs for transitioning from
Sunline™ footprint to the
XP series footprint are also
available (field installed
accessory)
Base Rails w/ Fork-
lift Slots (3 Sides)
& Lifting Holes
Terminal block
for hi-voltage
connection
Dual stage cool-
ing for maximum
comfort (7-1/2 -
12-1/2 Only)
Second Model
Nameplate Inside
Control Door
Slide-out motor and
blower assembly for
easy adjustment and
service.
