York Fitness T535i, Инструкция по эксплуатации

Страница: 17 / 36

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. *
*
MAT TOO LOOSE
If your mat appears to be loose, simply tighten both screws by an equal amount
( 1/2 a turn clockwise at a time ) then test.
MAT STICKY (DOES NOT RUN SMOOTHLY)
You may feel after a period of time (depending on how often you use the machine)
that the mat feels sticky.
We recommend you apply a light covering of Silicone between the mat and the running board.
This procedure may be repeated as necessary.
MAT TOO TIGHT
If it appears tight, simply loosen both screws by an equal amount
( 1/2 a turn anti-clockwise at a time ) then test.
We recommend that you use the following:
Lube-N-Walk Treadmill Lubrication Kit ( CODE: 5520 )
comes complete with instructions,
Available from your local Sports Retailer or contact YORK for your closest dealer.
Lube-N-Walk Treadmill Lubrication Kit ( CODE: 5520 )
HOW TO CHECK THE RUNNING MAT FOR PROPER LUBRICATION
- Disconnect the main power supply.
- Fold the treadmill up into the storage position.
- Feel the white back surface of the running mat.
If the surface is slick to the touch, then no further lubrication is required.
If the surface is dry to the touch, apply a suitable silicone lubricant.
WALKING MAT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, maintenance deck system. The mat/deck friction
may play a major role in the function and life of your treadmill, this requires periodic lubrication.
We recommend a periodic inspection of the deck. If the deck appears worn, please contact
our service department.
We recommend lubrication of the deck according to the following timetable:
Light use ( less than 3 hours per week ) every 8 months
Medium use ( 3-5 hours per week ) every 4 months
Heavy use ( more than 5 hours per week ) every 2 months
Press for
elevation
“UP”
HOW TO ADJUST THE ELEVATION
Press for
elevation
“DOWN”
1. Find the elevation switch located on the right handle bar.
2. Press the top part of the switch for elevation “DOWN”.
3. Press the bottom part of the switch of elevation “UP”.
4. Press either top or bottom of the switch for your desired
incline level, then simply release the switch when you feel
comfortable.
YORK T535i TM / 15