background image

 SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. 

*

*

OPTION:

 POSITIONING THE CHEST TRANSMITTER

It is recommended that you wear the transmitter against your bare skin to ensure 

flawless operation.

However if you wish to wear the transmitter over a shirt, moisten the shirt well under 

the rubber electrodes.

Attach the adjustable elastic strap to the transmitter.

THE KEY TO FLAWLESS OPERATION IS TO WET THE RUBBER ELECTRODE 

AREAS WELL.

The transmitter should be positioned next to your skin with the logo facing forwards in the

middle of the chest, just below the breast.

NOTE: If you have difficulty obtaining a good regular heart rate reading, please check the belt,

            which may need adjusting.  The rubber electrodes must be flat against the skin, and the

            belt must be in the correct position on the chest---Not too low!!

            Check the electrodes are wet.

Moisten the rubber electrodes on the underside of the belt as shown.

Water or saliva can be used. 

The transmitter is activated automatically when on the body and is deactivated automatically

when removed.

Adjust the strap to ensure a secure but comfortable fit.

Check that the belt is clean, with no accumulated sweat or dirt.

CARE AND MAINTENANCE

Thoroughly wipe the transmitter, and allow the elastic strap to dry after each use.

Store your chest transmitter in a cool dry place.

o

Do not expose your chest transmitter to extreme temperatures above 122  

o

o

o

Fahrenheit (50 C) or below 14  Fahrenheit (-10 C). 

Do not expose your chest transmitter to direct sunlight for extended periods such as 

leaving it in a car.

REPLACING THE TRANSMITTER BATTERY

Unscrew the battery hatch with a coin and 

remove the old battery.  Ensure that the new 

battery is inserted into the hatch correctly with 

the plus sign facing the battery hatch.  

Check that rubber gasket is clean, correctly fitted 

and not damaged, then close the hatch securely.  

The transmitter utilizes a 3 volt 2032 cell.

YORK T535i TM / 19

THE YORK CHEST TRANSMITTER IS  AN OPTIONAL EXTRA AVAILABLE FROM YOUR 

RETAILER FOR USE WITH THE T535i TREADMILL.

Содержание T535i





































Отзывы: