York Fitness T520i, Инструкция по эксплуатации

Страница: 18 / 32

MONITOR POWER SUPPLY
The training computer does not require any battery since it is supplied with power via the
running treadmill.
PROTECTIVE CIRCUIT
To protect your safety, this treadmill is designed and equipped with run away protection.
If the admissible operating speed of the treadmill is exceeded or fallen below, the protective
circuit will shut off the treadmill to protect you and the equipment. The treadmill will flicker all
display values to alert the user to the condition. Reset the treadmill by turning the power switch
on/off to return the treadmill back to the normal operating mode.
TROUBLE SHOOTING
WHEN TO CALL FOR HELP
This treadmill is designed with user safety as the number one priority. In the event of an
electrical failure, the treadmill will shut off automatically to prevent user injury and to prevent
damage to expensive components such as the motor.
When you encounter unusual behaviour from the treadmill, simply turn the power switch off and
on to reset the treadmill.
This should clear incidental errors and prepare the treadmill for normal operation again.
If, after you have reset the treadmill by turning the power switch off and on again, the treadmill
is still not operational, then it is time to call your dealer for advice.
Error 1: Speed sensor error
Turn the power switch off and on again to reset the treadmill.
If the treadmill returns to normal operation, you may continue to use the treadmill.
If treadmill does not return to normal operation, then call the dealer for advice.
Error 2: Over speed error
Call your dealer for advice.
Error 3: Safety key error
Simply secure the safety key in place and then try again.
TROUBLE SHOOTING GUIDE
Problem Potential Cause Corrections
Treadmill will not start 1. Not plugged in 1. Plug into grounded outlet.
2. Safety key not inserted 2. Insert the safety key into the console.
3. House circuit breaker tripped 3. Reset or replace fuse.
4. Treadmill circuit breaker tripped 4. Reset the circuit breaker.
If happens again, lubricate the deck to
reduce friction between mat and deck.
5. On/Off switch on "OFF" 5. Turn On/Off switch to "ON".
Running mat slips 1. Running mat not tight enough 1. Adjust running mat tension.
2. Drive belt not tight enough 2. Adjust drive belt tension.
Running mat hesitates 1. Insufficient lubrication 1. Apply silicone lubricant.
when stepped on 2. Running mat too tight / too loose 2. Adjust running mat tension.
Running mat is off center Running mat tension uneven Center the running mat.
across the rear roller
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. *
*
YORK T520i TM / 17