York Fitness T520i, Инструкция по эксплуатации

Страница: 7 / 32

10.
11.
9.
Rest the computer console on the front
handle bar and connect the computer wire
plug to the middle wire socket protruding
at the top of the handle bar post.
NOTE: TAKE CARE to ensure the wires are
connected as tightly as possible.
Secure the computer console to the handle
bar post by using, four allen head bolts and
star washers.
NOW
tighten all the bolts that you have fitted.
NOW
Attach the computer console on the handle
bar post mounting tubes as shown.
NOTE: TAKE CARE to ensure the wire does
not get trapped when you attach the
computer console.
If the console will not align and fit
easily, loosen the bolts fitted so far -
then try again.
RECHECK
Recheck that all of the bolts are tightened securely for your safety and comfort.
Plug the power cable into a suitable AC outlet (220~240 Volt 50Hz).
Before you use the treadmill for the first time turn on the power switch, connect
the magnetic safety key and then allow the treadmill to run for 10 minutes or so
without anyone on the treadmill.
Before you use the treadmill for the first time turn on the power switch, connect
the magnetic safety key and then allow the treadmill to run for 10 minutes or so
without anyone on the treadmill.
LEFT HANDLE
BAR POST
HANDLE BAR POST
MOUNTING TUBE
X4
5562-72 5562-07
COMPUTER
CONSOLE
COMPUTER WIRE
MIDDLE WIRE
Check that the mat is tightened properly and runs smoothly.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. *
*
YORK T520i TM / 06