Yopy YP3700, Руководство пользователя

Страница: 15 / 56

Setting the Network
After installing the Device Driver, you should set the Network for communicating between the PC
and the YOPY as follows:
1. To open “Network Connections” screen, you should click on “Start->Control Panel->
Network Connections” orderly on the desktop PC. Now, select Local Area Connections of
“ypndis Network Adapter” and then, select “Properties” after pressing the right button of the
mouse.
2. Now, select “Internet Protocol (TCP/IP)” among the connection items of the “Local Area Connection
Properties” screen and click on the “Properties” button and then, there appears the “Properties” screen.
3. You should set the IP address and the Subnet Mask when you have the
“
Internet Protocol
Properties" screen as shown below. As the IP of the YOPY has already been set by
“ 192.168.1.2 ” , you should enter one between “ 192.168.1.1 ” and “ 192.168.1.254 ” except for
“
192.168.1.2
”
into the IP address box of the below screen. And enter
“
255.255.255.0
”
into the
Subnet Mask box. And then, click on the “ OK ” button.
15