Page
13
/
35
1)
When the "Year" is flashing on the LCD, press the memory button “
” to increase the cycle of the year,
press the user 2 button “ ” to confirm the setting, and enter the "Month" setting.
2)
When the "Month" is flashing on the LCD, press the memory button “
” to increase the cycle of the month,
press the user 2 button “ ” to confirm the setting, and enter the "Date" setting.
3)
When the "Date" is flashing on the LCD, press the memory button “
” to increase the cycle of the date,
press the user 2 button “ ” to confirm the setting, and enter the "Hour" setting.
4)
When the "Hour" is flashing on the LCD, press the memory button “
” to increase the cycle of the hour,
press the user 2 button “ ” to confirm the setting, and enter the "Minute" setting.
5)
When the "Minute" is flashing on the LCD, press the memory button “
” to increase the cycle of the minute,
press the user 2 button “ ” to confirm and finish the setting.
6)
After setting, the LCD will display “done” and enter sleep mode 2 seconds later.
7)
In the date/time setting state, press
the user1 button “ ” can cancel the setting and power off the device.
6.2 Measurement
Notice:
Don’t smoke or drink pungent drinks such as coffee or wine, or do strenuous exercise for 30 minutes before
measure your blood pressure.
At least rest for 15 minutes in a stable environment before measurement.
You must repeat the measurement at least two times for accuracy, and take at least 2 minutes’ rest or more time
before next measurement.
Please sit down and don’t move your body during the measurement, if you are lying down during the
measurement, please take note.
6.2.1 Wrap the cuff
1) Insert the cuff connector into the cuff socket.
2) Remove the thicker clothing on the measured arm, expose the upper arm or leave only the thinner clothing.
