-4-
10. RS-232C output
Transmission system : Start-stop synchronization
Transmission speed : 4800bps (changeable : 1200 , 2400 , 9600 bps)
Way of communication : One-side direction
Frame format per one character.
Start bit 1bit
Data length 8bit (changeable : 7 bit)
Parity NONE (changeable : Even number parity, Odd number parity)
Stop bit 2bit
Frame format of one text.
Letter code are sent by ASC
Ⅱ
code.
Pin position
Pin No.
1.
Disconnection (N.C)
2.
TXD Transmission Data
4.
RTS
5.
CTS
20.
DTR
”Ready” mark is always output.
7.
S.G
The place for signal
The connector on the amplifier side
：
D-Sub 25P
Use the cross cable when connected with a personal computer.
Torque data Count data Print order (C/R)
Short circuit
1. Do not charge such torque as being over the specified torque.
2. During test, apply Zero-adjust from time to time because there are some differences
due to temperature-change.
3. Do not give any shock on the amplifier.
4. After all connections being ready, set the Power-Switch “ON”.
NOTE
13
1
25
14
