-1-
YET-2001C
PULSE COUNT
POWER
MODE
TIME OUT
TIME
ZERO ADJ.
N・m
0 1
1 2
3
OFF
P- P
■FEATURES
1. Large digital indication prevents miss reading from rather far distance.
2. The testers have time-out setting function and the timing can be adjusted at the unit
of 0.1 second with the range of 0.1~9.9 seconds. So measuring torque at starting-up
point is possible. The tool to be measured does not require timer system.
3. The testers can measure both of right and left rotation.
4. High accuracy (within ± 0.5% of full-scale).
5. Protector cover keeps off oil and dust from the indication panel of the amplifier.
6. Easy operation using micro-computer system.
7. Pulse Counter is built in.
Install the testers in the tool control room, the
test room or the assemblyline for inspection,
periodical performance check and torque adjust-
ment.
YOKOTA testers will give good effect on the
improvement of screw tightening control.
The testers are used for Impact Wrenches,
Impulse Wrenches, Angle Nut Runners,
Drivers, Ratchet Wrenches, and Torque
Wrenches (except the pre-set type).
YOKOTA DIGITAL TORQUE TESTERS
MODELS
:
YET-501C
・
1001C
・
2001C
・
5001C
・
10001C
(Measurement by timer from 0.1 to 9.9 seconds, is possible.)
The testers were developed to realize high accurate torque control.
▲Pick-up
▲Amp.