Yokota WU-1, Инструкция по эксплуатации, Страница: 22 / 36

76-QD7913EN-00Y00-03.doc
22
FINAL ANG MAX
Set contents Selection Default
Setting the upper limit of final angle. Set the value to be as follows:
Upper limit of final angle
≧
lower limit of final angle.
0
～
9999
（
°
）
9999
STOP ABORT TIME
Set contents Selection Default
Setting the free running stop abort time. 0.1
～
0.5
（
s
）
0.10
MOTOR LOW SPEED
Set contents Selection Default
Setting motor low speed. 1200
～
1500(rpm) 1200
MOTOR MIDDLE SPEED
Set contents Selection Default
Setting motor middle speed. 1500
～
3000(rpm) 2000
MOTOR HIGH SPEED
Set contents Selection Default
Setting motor high speed. 1500
～
4800(rpm) 3000
JUDGE TIME
Set contents Selection Default
Setting judge time. 0.02
～
0.99(s) 0.50
BOLT CO-EFFICIENT
Set contents Selection Default
Setting bolt coefficient. 0.60
～
1.50 1.00
AVERAGE NUM.
Set contents Selection Default
Setting average number. 1
～
6 3
AVERAGE MODE
Set contents Selection Default
Selecting average mode.
CONT: Averaging continuous data
PEAK: Averaging by extracting data for average number from peak value.
CONT
PEAK
CONT
SKIP NUM.
Set contents Selection Default
Setting skip number. 0
～
5 2