YOKOGAWA YTA Series Скачать руководство пользователя страница 8

Страница: 8 / 61

1-5

IM 01C50C05-01EN

■ Warranty

The warranty period of the instrument is as of condition shown when
purchasing.
Any trouble arising during the warranty period shall be replaced at free of
charge.
The following problems or troubles shall not be eligible of charge-exempt
repair.

• Caused by improper usage or storage of the customer which exceeds

the specification requirements.

• Caused by mishandling or modification.
• Caused by fire, earthquake or other acts of God that are not directly a

result of problems of the instrument.

● Conditions not eligible for charge-exempt repair.

• Problems caused by improper or insufficient maintenance on the part of

the customer.

• Trouble or damage caused by mishandling, misusage, or storage that

exceeds the design or specification requirements.

• Problems caused by improper installation location or by maintenance

conducted in a non-conforming location.

• Trouble or damage was caused by modification or repair that was

handled by a party or parties other than our consigned agent.

• Trouble or damage was caused by inappropriate relocation following

delivery.

• Trouble or damage was caused by fire, earthquake, wind or flood

damage, lightning strikes or other acts of God that are not directly a result
of problems with this instrument.

Содержание YTA Series






























































Результаты поиска

Содержание YTA Series

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA YTA Series, Руководство пользователя

Результаты поиска

Содержание YTA Series

Отзывы:

Бренды по названию

Популярные бренды