YOKOGAWA WN100, Руководство пользователя

Страница: 32 / 60

<7. Setting Parameters>
7-9
IM 01W07D01-01EN
Table 7.5 Diagnostic Status
Bit Diagnostic Status Contents
NAMUR
NE107
Category(* 1 )
Alert
Type
Alert
Priority
bit31(MSB) F:Failure status --- --- ---
bit30 C:Function check status --- --- ---
bit29 O:Out of specification status --- --- ---
bit28 M:Maintenance required status --- --- ---
bit27 Faults in electronics F 78 15
bit26 Faults in sensor or actuator element F 77 15
bit25 Installation, calibration problem C 76 11
bit24 Out of service C 75 8
bit23 Outside sensor limits O 74 11
bit22 Environmental conditions out of device specification O 73 11
bit21 Fault prediction: Maintenance required M 72 11
bit20 Power is critical low: maintenance need short-term M 71 15
bit19 Power is low: maintenance need mid-term M 70 11
bit18 Software update incomplete C 69 11
bit17 Simulation is active C 68 8
bit16 Faults due to process influence F 67 15
bit15 Faults due to non-compliance with specified operating conditions F 66 15
bit14 Other faults F 65 15
bit13-bit9 reserved by WCI --- --- ---
bit8-bit1 vendor specific area --- --- ---
bit0
Detail information available (* 2 )
1: available
0: no available
--- --- ---
(*1) NAMUR NE107 “Self-Monitoring and Diagnosis of Field Devices”
(*2) The bit0 is always “1: available” as WN100 regardless of the device status.