<1. Handling Precautions>
1-1
IM 21B03D01-01E
1. Handling Precautions
IMPORTANT
For installation, wiring and maintenance in
hazadous areas, please follow 1.5 Installation
of Intrinsically Safe Type, 1.6 Installation of
Flameproof Type and “Installation and Operating
Precautions for TIIS Intrinsically Safe Equipment
and TIIS Flameproof Equipment” at the end of
this manual.
The PK200 current-to-pneumatic converter is
fully factory inspected before shipment. When
the instrument is delivered, visually check the
instrument and accessories to ensure that they are
not damaged. This chapter describes the handling
precautions, read them carefully before using the
instrument.
For items other than those described in this chapter,
see the relevant items.
If you wish to make inquiry, contact the distributor
where you purchased the instrument or the nearest
YOKOGAWA service station.
1.1 Checking the Model Suffix
Code and Specifications
The data plate on the side face of the instrument
base shows the model suffix code and
specifications. With reference to the model suffix
code and specifications in section 2.3, confirm that
the instrument is as specified by the order.
For inquiry, inform us of the model suffix code and
instrument serial number.
Figure 1.1
Data Plate for General-Use Type
Figure 1.2
Data Plate for CSA Intrinsically Safe
Type
Figure 1.3
Data Plate for FM Explosionproof Type
1.2 Transportation Precautions
To prevent damage occurring during transportation,
transport the converter in the original shipping
container (box) with all packing items and
equipment in its proper position.
1.3 Storage Precautions
(1) Select a storage place :
• Which is protected from rain and water.
• Which is free from vibration and impact.
• Whose temperature and humidity are as
specified below. Room temperature and
humidity (approx. 25°C and 65%) are more
recommendable.
Temperature: -10 to 60°C
Humidity: Less than 80%
(2) Store the converter in the packing condition
of shipment from YOKOGAWA whenever
possible.
三千控制阀网
www.cv3000.com
