YOKOGAWA SR10000 series Скачать руководство пользователя страница 30

Страница: 30 / 137

1-24

IM 04P03B01-01E

Item

Description

Reference
Section

RJC of TC input

Use

RJC

in Basic Setting mode to select whether to use the internal

4.4

RJC function or an external RJC function.

Filter (pen model)

Use

FILTR

in Basic Setting mode and select Use or Not.

4.11

If Use is selected, set the filter time constant using

AUX > FILTR

in Setting mode.

3.2

If Not is selected, the

AUX > FILTR

item does not appear.

Moving average (dot model)

Use

M_AVE

in Basic Setting mode and select Use or Not.

4.10

If Use is selected, set the number of samples of moving average using

AUX >

3.3

M_AVE

in Setting mode.

If Not is selected, the

AUX >

M_AVE

item does not appear.

Integration time of the A/D converter

4.2

Use

INTG

in Basic Setting mode to set the integration time of the A/D converter.

Temperature Unit

Select the temperature unit using

TEMP

in Basic Setting mode.

4.24

Alarm functions

Item

Description

Reference
Section

Alarms for each channel

Use

ALARM

in Setting mode.

2.2

Set a hysteresis on the alarm occurrence/release value of high limit alarm and low limit alarm

Use

ALARM > HYS

in Basic Setting mode to set the hysteresis to be applied

4.1

to the high limit alarm and low limit alarm of measurement channels.

Diagnosis output

Use

ALARM > DIAG

in Basic Setting mode to set the function.

4.1

Change the alarm output relay operation

ALARM > RELAY

in Basic Setting mode set to

“DE_EN

”, alarm output relay is

4.1

energized during normal operation and de-energized when an alarm occurs.

Recording functions

Item

Description

Reference
Section

Recording interval (dot model)

Use

AUX > TREND

in Setting mode to set the recording interval to AUTO or FIX.

3.1

Change the recording color of measurement channels (dot model).

Use

COLOR

in Basic Setting mode to set the recording color of measurement

4.5

channels.

Turn trend recording ON/OFF (dot model)

Use

AUX > PRINT

in Setting mode to turn ON/OFF the trend recording for each

3.6

measurement channel.

Chart speed

Use

CHART

in Setting mode to set the chart speed.

2.4

Record by setting recording zone

Use

AUX > ZONE

in Setting mode to set the recording zone for each channel.

3.4

Partial expanded recording Use

PART

in Basic Setting mode and select Use or Not.

4.12

If Use is selected, set the display mode using

AUX > PART

in Setting mode.

3.5

If Not is selected, the

AUX > PART

item does not appear.

Record by compensating for the pen offset along the time axis (pen model)

Use

POC

in Setting mode to turn ON/OFF offset compensation.

4.6

Date format

Use

DATE

in Basic Setting mode to set the printout/display format

4.14

of the date.

Time format

Use

T_PRN

in Basic Setting mode to set the printout format of the time.

4.16

1.6 Function Setup Guide

Содержание SR10000 series










































































































































Результаты поиска

Содержание SR10000 series

Отзывы:

Похожие инструкции для SR10000 series

Бренды по названию

Популярные бренды

YOKOGAWA SR10000 series, Руководство пользователя

Результаты поиска

Содержание SR10000 series

Отзывы:

Похожие инструкции для SR10000 series

Бренды по названию

Популярные бренды