YOKOGAWA SC450G Скачать руководство пользователя

Страница: 56 / 84

IM 12D08N05-01E

5-18

<5. MENU STRUCTURE COMMISSIONING>

5.13 Logbook configuration

General

Logbook is available to keep an electronic record of events such as error messages,

calibrations and programmed data changes. By reference to this log, users can for instance

easily determine maintenance or replacement schedules.

In “Configure Logbook” the user can select each item he is interested in to be logged when

the event occurs. This can be done for three separate logbooks. Each logbook can be

erased individually or all at once. Enable the ”Warn if Logbook full” when you would like

to be warned when the logbook is almost full. The content of the logbook(s) can also be

retrieved from the converter using the “EXAxt Configurator” software package which can

be downloaded from the Yokogawa Europe website.

5.14 Advanced setup

Defaults

The functionality of the SC450G allows to save and load defaults to come to a known

instrument setting. The SC450G has both factory and user defined defaults.

After a “load default” the instrument will reset.

The following parameters are not included in the defaults

1. X-axis timing

2. Auto return (10 min / disabled)

3. Tag

4. Passwords

5. Date and time

6. Language

7. The contents of all logbooks

8. HART parameters (address, tag, descriptor, message)

Tag

A tag provides a symbolic reference to the instrument and is defined to be unique

throughout the control system at one plant site. A tag can contain up to 12 characters. If

the instrument is purchased with the /SCT option, the TAG is pre-programmed with the

specified tag number.

Passwords

Calibration and Commissioning may be separately protected by a password. By default

both passwords are empty. Entering an empty password results in disabling the password

check. A password can contain up to 8 characters. When a password is entered for the

calibration and commissioning a 4-digit operator ID can be entered. One can also leave the

ID empty.

Date/time

The Logbooks and trend graph use the clock/calendar as reference. The current date and

time is set here. The current time is displayed in the third “zoom” menu.

NOTE

The fixed format is YYYY/MM/DD HH:MM:SS

Содержание SC450G





















































































Результаты поиска

Содержание SC450G

Отзывы:

Похожие инструкции для SC450G

Бренды по названию

Популярные бренды

YOKOGAWA SC450G, Руководство пользователя

Результаты поиска

Содержание SC450G

Отзывы:

Похожие инструкции для SC450G

Бренды по названию

Популярные бренды