IM 12A06S01-01EN-P
8
4-3. Checking the accessories
Make sure that besides the SA11 device the accessories in Table 1.1 are included.
Options are available only if ordered.
Table 1.1: Accessories
Product Name
Quantity
Remark
SA11 Smart Adapter dust caps
2 pcs/device To prevent dust inside the connectors
Option: Universal mounting set
1 set
Option code /UM*
Startup Manual
1 copy
Quick startup description
QIS/QIC
1 copy
Test certificate
*Option /UM contains Pipe and Wall mounting hardware
NOTE
Be sure to remove the dust caps before using the device.
4-4. Regulatory Compliance
Safety:
IEC 61010-1
EN61010-1
Category based on IEC 61010: I (Note 1)
Pollution degree based on IEC 61010: 2 (Note 2)
Note 1: Installation category, called over-voltage category, specifies impulse withstand
voltage. Equipment with “Category I” is used for connection to circuits in which
measures are taken to limit transient over-voltages to an appropriately low level.
Note 2: Pollution degree indicates the degree of existence of solid, liquid, gas or other
inclusions which may reduce dielectric strength.
EMC:
EN61326-1 Class A, Table 2 (For use in industrial locations)
Influence of immunity environment (Criteria A): Output is within
accuracy
EN61326-2-3
AS/NZS CISPR 11
KC (registered as R-R-YPA-SA11)
RoHS2:
EN 50581
Installation altitude:
2000 m or less
CAUTION
The device is packed carefully in a shock
absorbing box, nevertheless, the device may
be damaged or broken if subjected to strong
shock. Handle with care.
CAUTION
The device is a Class A product, and
it is designed for use in the industrial
environment. Please use this device in the
industrial environment only.
WARNING
Do not use an abrasive or organic solvent in
cleaning the device.
WARNING
The SA11 contains components that can be
damaged by electrostatic discharge.
When servicing this device, please observe
proper procedures to prevent such damage.