manualshive.com logo in svg

YOKOGAWA MT300, Руководство по началу работы, Страница: 38 / 89

Поделиться
Скачать
YOKOGAWA MT300 Скачать руководство пользователя страница 38

Measurement Preparation

2.4  Mounting, Removing, and Charging the Battery Pack (/EB option)

2-11

IM MT300-02EN

1 

2 

3 

4 

5 

6 

App

Index

•  Pour toute information sur le transport aérien des batteries au lithium-ion, consulter les 

exigences énoncées dans le Règlement de l’IATA sur le transport des marchandises 
dangereuses (Section II pour les batteries au lithium).

 ATTENTION

Le pack de batteries pèse environ 500 g. Éviter de le laisser tomber sur les doigts ou les 
orteils.

Procedure

Mounting the Battery Pack

1.

  Remove the seals from the four battery pack attachment holes on the top panel.

2.

  Remove the two screws holding the battery pack terminal protection cover.

 

  

Battery pack terminal protection cover

Screw

Screws

Seals on the battery pack attachment holes

3.

  Flip the cover over, and place it at the location indicated in the following figure. Using a 

screwdriver, screw the cover at two locations.

 

  

Battery pack cushion

Fasten the screw.

Fasten the screw.

Battery pack terminal

Battery pack terminal protection cover

4.

  Align the battery pack terminal with the battery pack cover terminal, and place the battery pack 

on the battery pack cover. 
Gently push the battery pack with your fingers so that the terminals become securely 
connected.

 

  

Battery pack

Press with your 

finger.

Содержание MT300


























































































Отзывы:

Нет отзывов