manualshive.com logo in svg

YOKOGAWA MT300, Руководство по началу работы, Страница: 30 / 89

Поделиться
Скачать
YOKOGAWA MT300 Скачать руководство пользователя страница 30

Measurement Preparation

2-3

IM MT300-02EN

1 

2 

3 

4 

5 

6 

App

Index

2.2  Appropriate Locations for Using the Instrument

 WARNING

•  Install the instrument so that you can immediately remove the power cord if an abnormal or 

dangerous condition occurs.

•  Do not use the instrument to measure locations that fall under Measurement Categories II, 

III, and IV.

 CAUTION

This instrument is equipped with voltage and current source and measurement features. Do 
not use the instrument when it is wet. Doing so may damage the instrument.

French

 AVERTISSEMENT

•  Installer l’instrument de manière à pourvoir immédiatement le débrancher du secteur en 

cas de fonctionnement anormal ou dangereux.

•  Ne pas utiliser l’instrument pour mesurer des emplacements appartenant aux catégories 

de mesure II, III, et IV.

 ATTENTION

Cet instrument est doté de fonctions de mesure et de source de courant et de tension. Ne pas 
utiliser l’équipement lorsqu’il est mouillé. Le cas échéant, un endommagement de l’équipement 
risquerait de se produire.

Installation Conditions

Install the instrument in a place that meets the following conditions.

Flat, Even Surface

Install the instrument on a stable surface that is level in all directions. Pressure may not be measured 
correctly when the instrument is placed in an unstable or inclined place.

Ambient Temperature, Ambient Humidity, and Altitude at the 

Location of Use

Use the instrument in the following environment.

Ambient temperature

5°C to 40°C (10°C to 35°C when -D00 is selected)

Ambient humidity

20% RH to 80% RH; no condensation

Operating altitude

2000 m or less

Содержание MT300


























































































Отзывы:

Нет отзывов