manualshive.com logo in svg

YOKOGAWA GS200, Руководство пользователя, Страница: 168 / 186

Поделиться
Скачать
YOKOGAWA GS200 Скачать руководство пользователя страница 168

3

2

1

4

5

6

7

8

9

10

11 

12

13

14

15

App

Index

5.

  Press each key and check that the name of the respective key is displayed.

 

 

     

6.

  Press 

ESC

 twice to end the test.

Executing the Self-Test

4.

  Press the 

Self Test

 soft key to start the test.

 

 

     

5.

  The results appear after the test finishes.

 

 

     

6.

  Press any key to end the test.

Explanation

Display Test

The display test checks that there are no color dropouts and that the display is 
functioning normally. If there is a problem with the display, contact your nearest 
YOKOGAWA dealer.

Key Test

The key test checks whether the front-panel keys are operating properly. If the name of 
the key that you press is displayed, the key is operating properly. If the name of the key 
is not displayed, contact your nearest YOKOGAWA dealer.

Self-Test

The self-test checks whether the internal functions of the GS200 are operating correctly. 
If an error appears, contact your nearest YOKOGAWA dealer.

Note

When any of these tests begins, the output is turned off.

<<Corresponding Command Mnemonic>>

*TST?

14.3  Self-Test

14-7

IM GS210-01EN

Troubleshooting and Maintenance

Содержание GS200



























































































































































































Отзывы:

Нет отзывов