12-8
IM GS210-01EN
(11) Size of the response data block
2 MB maximum.
(12) A list of supported common commands
See section 13.2.11, “Common Commands.”
(13) Device condition after a successful calibration
The settings return to the conditions that existed before the calibration,
measurements are terminated, and previous measured data are invalidated.
(14) The maximum length of block data that can be used for the *DDT trigger macro
definition
Not supported.
(15) The maximum length of the macro label for defining macros, the maximum length
of block data that can be used for the macro definition, and the process when
recursion is used in macro definitions
Macro functions are not supported.
(16) Reply to the *IDN? query
See section 13.2.11, “Common Commands.”
(17) Size of storage area for protected user data for PUD and *PUD?
*PUD and *PUD? are not supported.
(18) The length of the *RDT and *RDT? resource names
*RDT and *RDT? are not supported.
(19) The change in the status due to *RST, *LRN?, *RCL, and *SAV
*RST, *RCL, and *SAV
See section 13.2.11, “Common Commands.”
*LRN?
This common command is not supported.
(20) The extent of the self-test using the *TST? command
Performs a test that is equivalent to the self-test that is executed from the front
panel. Returns 0 if successful, otherwise returns an error code.
The self-test consists of the RAM test, ROM test, and digital test.
(21) The structure of the extended return status
See section 13.3.
(22) Whether each command is processed in an overlapped manner or sequentially
All commands are sequential commands.
(23) The description of the execution of each command
See the functional and procedural explanations given in chapters 1 to 12 and 14.
12.6 About the IEEE 488.2-1992 Standard