YOKOGAWA FA-M3 Vitesse, Руководство пользователя

Страница: 27 / 76

4-1
IM 34M6H33-01E 1st Edition : July 1.2004-00
4. Registers
4.1 Register List
Table 4.1 Register List
Data
Position
Number
For details,
see:
1
6
Command response area Section 7.3
7
10
LPS area
Subsection
4.1.1
11
14
LAS area
Subsection
4.1.2
15
18
LDS area
Subsection
4.1.3
19
22
LPF area
Subsection
4.1.4
23
38
NODE STATUS area
Subsection
4.1.5
39
54
NODE I/O CONFIG CODE area
Subsection
4.1.6
55
70
NODE ID CODE area
Subsection
4.1.7
71
86
NODE PARAMETER area
Subsection
4.1.8
87
102
Contact input data area
Subsection
4.1.9
103
118
Contact output data area
Subsection
4.1.10
119
124
Command setup area
Section
7.1
Note: Data position numbers 1-102 are intended for reading by a user program.
The above table lists all the registers of the ASi Master module that a user can access
by referring to the given data position number in a ladder or BASIC program.
The following data position numbers are normally accessed:
Contact input/output of slaves: corresponding to data position numbers 87-102, 103-118
Analog input/output of slaves: corresponding to data position numbers 1-6, 119-124
The LPS, LDS and LPF areas provide information on slave errors.
The other registers may be accessed as required.
You can create a user program to access the input relays and output relays described in
Chapter 5. For details on programming, read Chapter 7 and Chapter 8.