YOKOGAWA F3LC11-1F, Руководство пользователя

Страница: 29 / 202

A1-15
IM 34M6H41-02E 2nd Edition : Aug. 1, 2005-00
n
Attaching Modules in Intense Vibration Environments
If the module is used in intense vibration environments, fasten the module with a screw.
Use a screw described in the table below and tighten it into the guide channel at the top
of this module with a phillips screwdriver.
Screw to be provided
Binder screw M4, length 12-15mm
(For screw with washer, the length should be
14-15mm)
FA10502.VSD
Figure A1.7 Fastening this Module with a Screw
n
Grounding of Cable
To ensure compliance to CE Marking for a system incorporating this module, use a
shielded cable for connecting to the module. Peel off part of the insulation of the shielded
cable to expose the shield, and apply an FG clamp to the shield to secure and ground it
Peel off insulation and
apply an FG clamp to
the exposed shield.
Shielded cable
Screw the FG clamp
to the metal plate of
the panel enclosure
for grounding.