<1. Introduction>
1-3
IM 01C25F01-01E
(b) Wiring
WARNING
• The instrument must be installed by an
expert engineer or a skilled personnel. The
procedures described about WIRING are not
permitted for operators.
• Please confirm that voltages between the
power supply and the instrument before
connecting the power cables and that the
cables are not powered before connecting.
(c) Operation
WARNING
• Wait 5 min. after power is turned off, before
opening the covers.
• Do not open the cover in wet weather or
humid environment. If the cover is opened,
stated enclosure protection is not applicable.
(d) Maintenance
WARNING
• Please do not carry out except being written
to maintenance descriptions. When these
procedures are needed, please contact
nearest YOKOGAWA office.
• Care should be taken to prevent the build
up of drift, dust or other material on the
display glass and name plate. In case of its
maintenance, soft and dry cloth is used.
(e) Explosion Protected Type Instrument
WARNING
• Users of explosion proof instruments should
refer first to section 2.4 (Installation of an
Explosion Protected Instrument) of this
manual.
• The use of this instrument is restricted to
those who have received appropriate training
in the device.
• Take care not to create sparks when
accessing the instrument or peripheral
devices in a hazardous location.
(f) Modification
WARNING
Yokogawa will not be liable for malfunctions or
damage resulting from any modification made to
this instrument by the customer.
(g) Product Disposal
The instrument should be disposed of in
accordance with local and national legislation/
regulations.
(h) Authorized Representative in EEA
In relation to the CE Marking, The authorized
representative for this product in the EEA
(European Economic Area) is:
Yokogawa Europe B.V.
Euroweg 2, 3825 HD Amersfoort,The Netherlands
