v
IM 701949-01EN
Make sure to observe the following safety precautions.
Failure to comply with the precautions could lead to
injury or death or damage to the instrument.
WARNING
Purpose of the product
The product is used in combination with an oscilloscope to observe
and measure electrical signals. Do not use for any other purpose.
Grounding of the measuring instrument
The protective grounding terminal of the oscilloscope must be
connected to ground.
Grounding of the probe
Make sure to connect the ground lead or the equivalent accessary
of the probe to the grounding potential.
Be careful of electric shock
Never use the probe with wet hands or when the probe itself is wet.
Doing so may cause electric shock. Be careful of electric shock
when you connect the probe to the device under measurement.
Do not operate in wet or damp conditions.
To prevent electric shock, do not operate the probe in wet or damp
conditions.
Avoid exposed circuitry
To prevent electric shock, remove metal and jewelry such
as watches and rings. Do not touch exposed connections or
components when power is present on the device.
Do not operate in explosive atmosphere
To prevent injury or fire hazard, do not operate the probe in an
atmosphere of flammable or explosive gases or vapors.
Do not operate with suspected failures
Stop using the probe if you suspect that the probe is damaged.
Consult your nearest YOKOGAWA dealer.
Do not operate with a damaged signal cable
If the signal cable is torn and the inner metal is exposed or if a
color different from the outer sheath appears, stop using the cable.
Do not disassemble or modify
Do not disassemble or modify the product. YOKOGAWA assumes
no liability if you disassemble or modify the product.
Safety Precautions