YOKOGAWA 701949 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 24

YOKOGAWA 701949 Скачать руководство пользователя страница 14

4

IM 701949-01EN

3. How to use

How to Connect to Oscilloscopes

WARNING

• Use this probe only with YOKOGAWA’s oscilloscopes. Even

with YOKOGAWA’s oscilloscopes, this probe can be used only
when specified as an accessory. Do not use accessories other
than the standard accessories of this probe.

• Do not apply a voltage exceeding the maximum input voltage

to the probe. EN61010-031 is a compliant safety standard that
is applied to the probe alone. For the actual safety standards
and operating conditions, comply with the conditions of the
oscilloscope. Failure to follow this precaution may cause
accidents, such as electric shock or damage to the instruments.

• When the oscilloscope’s input coupling is AC, a DC voltage is

applied to the oscilloscope’s input at the same electric potential
as the probe’s input. Make sure not to exceed the oscilloscope’s
maximum input voltage.

• This probe cannot be used to measure the voltage between

two points floating from the ground potential. Consider using a
differential probe.

• When disconnecting the probe, turn off the power to the device

under measurement, disconnect the probe from the device, and
then disconnect the probe from the oscilloscope.

CAUTION

• Since the contact tips are very thin and sharp, handle them with

care. Attach the protection cap when not in use.

• Avoid shock to the probe body. Do not bend or pull the cables

excessively. Doing so may damage or disconnect the probe.

«
...
12
13
14
15
16
...
»

Содержание 701949

























Отзывы:

Нет отзывов