Yoda VG400R, Руководство пользователя

Страница: 78 / 86

The user at ext. 100 wants to make a call to VG B, 203. What
we need to do is to pick up the handset with extension ‘100’
and dial ‘316’. After you hear the dial tone again, dial ’02-203’.
Then, the phone attached to VG B should ring.
VG B :
If users at VG B want to make a call to ext 100 through VG A,
one should dial, ’01-201’ where the PBX line is connected to
port 1. After hearing the dial tone, just dial the extension
number ‘100’.
L
Hint
Imagine how we use the PBX with associated
extension handsets. We pick up the handset and
dial any extension number directly to your
colleagues, and dial ‘0’ or ‘9’ to make a call to PSTN
network.
The same is with VG B, after you dial “01-201”, you
can do the same thing because “01201” connects
you to the extension handset 316. In this scenario
the handset with extension 203 connected to VG B
may also be looked as an extension of the PBX.
After all of the above, your VG should perform normally. Let’s
do the following two things:
A) Modify the IP address, Mask, and Gateway to your network
so that the VG may connect to the Internet. Do the same
thing to your second, and third VG so they may connect to
the Internet as well.
B) Check the bandwidth, and the router. Normally, if you can
ping each other, it means that they should talk to each other
via VoIP calls.
74