manualshive.com logo in svg

YILKAR YH COMFORT, Руководство по эксплуатации

Поделиться
Скачать
YILKAR YH COMFORT Скачать руководство пользователя страница 4

1. Introduction

To fully enjoy the comfort of your Yılkar heater, please read this user manual carefully. If you have
additional questions regarding assembly or operation, please contact your specialist dealer or
Yılkar service. The experts here will gladly provide you with reliable and expert knowledge.
Please keep this manual carefully.
We wish you a good trip.
 
This manual is part of the device and contains information for the user to use the device safely.
The operator's manual describes all the functions of the control panel. If you have any questions,
please contact service and / or customer service.
 
This user manual should be forwarded to the next owner of the device.
 
 

1.1 Warranty and liability

Yılkar accepts no liability for defects, damage and damages caused by non-compliance with the
installation instructions and user manual, as well as the warnings provided within them.
This disclaimer applies especially to:
 
Improper use
Repairs not carried out by a Yılkar service workshop
Use of non-genuine parts
Conversion of the unit without permission from Yılkar
 
 

2. Safety

Explosion hazard in environments with flammable vapors, flammable gas and hazardous
materials (eg gas stations, storage tanks, fuel, coal, wood or grain tanks)
Do not switch on or operate the heater !!

Warning !

4

Inhalation of toxic gases in confined spaces, danger of poisoning and suffocation
The heater should never be operated in confined spaces such as garages or workshops
without exhaust gas discharge, including the programming function !!

Warning !

Fire hazard due to flammable materials or liquids in the hot air stream (Air heater). 
Do not block hot air flow !!

Warning !

Содержание YH COMFORT

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды