manualshive.com logo in svg

YILKAR YH COMFORT, Руководство по эксплуатации

Поделиться
Скачать
YILKAR YH COMFORT Скачать руководство пользователя страница 21

8. Cleaning

Please use only a soft, lint-free cloth for cleaning the control panel. Moisture should not get into
the body. 
Do not use glass cleaners, household cleaners, sprays, solvents, alcohol-containing or
abrasive cleaners.

It is forbidden to include the control panel in domestic waste.
Please observe the national legal regulations on waste management for electronic products.

9. Error Statement and reset

If the device detects any error, it will send an error
notification to the screen.
If the error is corrected by looking at the error table,
the "OK" button is clicked to renew.
If the error is fixed, it will disappear from the screen.

Error display E17 means there is a communication
problem. To solve the problem, the heater must be
de-energized and re-applied. If the error is fixed, it is
not displayed on the screen.

Warning!
If the error display on the screen is not resolved with these methods and continues,
please do not try to start your heater, contact the authorized Yılkar service.

Warning!
Maintenance and repair work on heaters should only be carried out by trained specialist
personnel.

21

 

If you press the "Back" button for more than 5s, the
control panel will close completely. If you turn it on
again, it is opened by resetting. If the error is
resolved, it is not displayed on the screen.

As an alternaive :

Содержание YH COMFORT

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды