NR120 5G Router User Manual
27
Bridging-Create Bridge:
creates a new empty network bridge for later use.
STP means Spanning Tree Protocol and with PRIO users are able to set the
bridge priority order. The lowest number has the highest priority.
Bridging - Assign to Bridge:
allows users to assign any valid interface to a
network bridge. Consider setting the Wireless Interface options to Bridged if
they want to assign any Wireless Interface here. Any system specific bridge
setting can be overridden here in this field.
Current Bridging Table:
shows current bridging table
Create steps as below:
Click 'Add' to create a new bridge, configuration is as below:
Create bridge option: the first br0 means bridge name. STP means to on/off
spanning tree protocol. Prio means priority level of STP, the smaller the
number, the higher the level. MTU means maximum transfer unit, default is
1500, delete if it is not need. And then click 'Save' or 'Add'. Bride properties
is as below:
Enter relewant bridge IP address and subnet mask, click 'Add' to create a
bridge.
Note: Only create a bride can apply it.
Assign to Bridge option: to assign different ports to created bridge. For
example: assign port (wireless port) is ra0 in br1 bridge as below:
Prio means priority level: work if multiple ports are within the same bridge.
The smaller the number, the higher the level. Click 'Add' to take it
effect.
