NR120 5G Router User Manual
13
The 5G industrial router provides the following indicators: "PWR", "SYS",
"Online", "WIFI". The description of the status of each indicator is as follows:
Indicator
Status
Content
PWR
on
Equipment power is normal
off
The device is not powered on
SYS
blinking
The system is operating normally
off
The system is abnormal
Online
on
The device is logged into the network
off
The device is not logged into the network
WIFI
on
WIFI on
off
WIFI off
WAN
off
WAN interface is not connected
On/blinking WAN interface is connected/data communication
is in progress
LAN
off
LAN interface is not connected
On/blinking
The LAN interface is connected/data
communication is in progress
Note: The indicator lights of the WAN port and the LAN port are only green,
and the yellow light has no indication.
2.6 Reset button description
The 5G industrial router has a reset button, marked as "RST". The function of
this button is to restore the parameter configuration of the 5G industrial router to
the factory value.
The method is as follows: Insert a pointed object into the "RST" hole, and gently
press and hold the reset button for about 15 seconds and then release. At this time,
the 5G industrial router will automatically restore the parameter configuration to the
factory value, and in about 10 seconds After an hour, the 5G industrial router
automatically restarts (the automatic restart phenomenon is as follows: the
"System" indicator turns off for about 10 seconds, and then it works normally).
