NR120 5G Router User Manual
49
from the Ping or detection of other Internet users. so that make More difficult
to break into your network.
The default state of this feature is enabled ,choose
to disable allow anonymous Internet requests.
Filter IDENT (Port 113):
Enable this feature can prevent port 113 from
being scaned from outside. Click the check box to enable the function otherwise
disabled.
Block WAN SNMP access:
This feature prevents the SNMP connection
requests from the WAN.
After Complete the changes, click the
Save Settings
button to save your
changes. Click the
Cancel Changes
button to cancel unsaved changes.
Impede WAN DoS/Bruteforce
Limit ssh Access:
This feature limits the access request from the WAN by ssh,
and per minute up to accept two connection requests on the same IP. Any new
access request will be automatically dropped.
Limit Telnet Access:
This feature limits the access request from the WAN by
Telnet, and per minute up to accept two connection requests on the same IP.
Any new access request will be automatically dropped.
Limit PPTP Server Access:
When build a PPTP Server in the Router,this
feature limits the access request from the WAN by ssh, and per minute up to
accept two connection requests on the same IP . Any new access request will be
automatically dropped.
Limit L2TP Server Access:
When build a L2TP Server in the Router, this
feature limits the access request from the WAN by ssh, and per minute up to
accept two connection requests on the same IP. Any new access request will be
automatically dropped.
Log Management
The Router can keep logs of all incoming or outgoing traffic for your Internet
connection.
Log:
To keep activity logs, select Enable. To stop logging, select Disable. When
select enable, the following page will appear.
