Yetter 8500 SERIES, Руководство пользователя

Страница: 13 / 40

13
OPERATION
Tie-Down Brackets
• The tie down brackets consist of two heavy duty strap assemblies which secure
current design headers to the transport. For proper installation follow steps as
shown.
1. Loosen strap by pulling up ratchet handle and lock in open position
CAUTION: BE SURE RATCHES, WEBBINGS, AND HOOKS ARE IN PROPER
WORKING CONDITION SO THAT DAMAGE DOES NOT OCCUR DUE TO LOSS OF
HEADER FROM TRANSPORT
Note: Before tightening, be sure header is resting against backstops on lower rest
brackets.
Note: Be sure tie down bracket assemblies are secured to transport directly below the
section on the header that the tie down hook is being attached to. DO NOT ATTACH
BRACKET AND PULL STRAP AT AN ANGLE TO THE BRACKET TO SECURE. Doing
so could result in unnecessary stress and wear to tie down webbing.
2. Slide tie down bracket across lower rest tube and secure in appropriate location
under header by inserting carriage bolt, flat washer and knob. Tighten into
position by turning knob clockwise.
Note: It is recommended that the tie downs be secured to a main bar or sufficient
bar/tube on the combine head that is rigid enough to support total weight of
header. Failure to do so could result in damage to the combine header.
CAUTION: BE SURE ALL SHARP EDGES ARE REMOVED SO THAT WEBBING
DOES NOT BECOME CUT OR FRAYED.