3
|
YETI SNOWMX USER MANUAL
USER NOTICE AND DISCLAIMER
The
YETI SnowMX
Dirt-To-Snow bike conversion
System is designed to provide exceptional traction
and floatation in all winter conditions.
This document holds important information
regarding driving a motorcycle equipped with the
YETI SnowMX
System. It is mandatory that every
user takes the time to carefully read, understand
and then consult this reference manual and user
guide as well as the motorcycle owner's manual as
needed. When purchasing either a new or used
Conversion System, the user must obtain all
documentation related to the System, including
manuals and guides related to the motorcycle on
which the System is installed. If need be, contact
the YETI products dealer nearest to you to obtain
any additional information. You may also consult
the Yeti Web site at
www.yetisnowmx.ca
and
contact our technical support by email at
.
YETI believes that there are certain risks related to
the installation and use of the System. Our
experience shows that the System is safe.
However, the user must be aware of the risks
related with driving a motorcycle with the
particularities of this type of System. The
motorcycle rider must, at all times, respect all
applicable laws and regulations, the indications of
the System manufacturer and the indications from
the motorcycle manufacturer fixed by law, namely
when age restrictions exist and motorcycle base
equipment is required (headlights, flashers and
brake lights, rear view mirror, etc.). The user must
always wear adequate safety equipment, such as
a helmet, safety glasses (or visor), protective
clothing, boots and gloves. It is understood that
driving while impaired or intoxicated presents a
danger for the motorcycle user and others and is
against the law.
The System consists of many moving parts,
including transmission wheels. If an object lodges
itself or becomes jammed into the System and
blocks the track, it is mandatory to stop the engine
and the vehicle and apply the security brake
before removing said object. By avoiding to do so,
the user exposes himself to sudden movement of
the motorcycle or to breakage of a part or
component coming from the System, which could
cause severe injuries. It is also very important to
wear full length clothing and always avoid hanging
or stringy accessories.
Driving a motorcycle equipped with such a System
requires particular precautions and a knowledge of
proper driving techniques of such vehicles.
An evaluation by the user of the conditions and
terrain (state of the ground, grade of hill, density of
snow, etc.) is equally essential.
A motorcycle equipped with a System cannot
compete and/or be used to perform stunts,
acrobatics or other exploits, as these could result in
loss of control or severe injuries.
Insufficient knowledge of a motorcycle during down
hill riding, climbs and crossing of obstacles and
turns can result in tipping or roll over, and can
cause severe injuries.
Carrying a passenger, a load or attaching a tow can
cause the motorcycle to be less stable, and affect
usability. Unless otherwise prescribed by law and
by the motorcycle manufacturer, you must not carry
a passenger, loads or tow any objects.
The installation of a System:
• Increases ground clearance.
• Changes the center of gravity.
• Increases motorcycle length, width and weight.
• Reduces ground pressure.
These parameters will effectively change driving
characteristics of a motorcycle equipped with the
System.
Consequently,
it is highly recommended that the
user adapt his driving style to the new
characteristics mentioned above.
The rider must
always use caution when he crosses obstacles,
circulates through narrow paths, meets vehicles
coming in the opposing direction, etc.
As it was designed, the System will considerably
reduce the motorcycle top speed and can falsify
the
speedometer.
Generally,
the
System
transmission wheel diameter is less than that of the
tire. Therefore, the vehicle speed will be less than
that actually displayed. Whether the motorcycle is
equipped or not with the System, users must
always adapt the speed to actual driving
conditions. Users must never exceed speed limits
or drive faster than their capacities allow.
Excessive speed remains one of the main causes
of severe motorcycle accidents.
Camso is proud to offer dirt-to-snow motorcycle
conversion kits within its wide range of products.
Motorcycle Conversion Systems are not only
reliable, but safe. However, there are risks inherent
to riding a motorcycle equipped with the System. It
is therefore very important that the rider familiarize
himself with the proper riding techniques of a
motorcycle equipped with a System. The rider must
also adapt his riding to his experience level, and
continually evaluate operating conditions and
terrain to safely and efficiently make the best of the
YETI SnowMX
motorcycle Conversion System.
Содержание SnowMX 2021
