YETI SNOWMX USER MANUAL
|
20
Figure 42
• With your thumbs, apply pressure to the belt (
1
),
where the tension gauge (
2
) sits, toward the
tensioner pulley (
3
). See Figure 43.
Figure 43
•
Recommended
setting
: Required belt tension
is 11 mm (7/16'') of play, which corresponds to
the width of the red tension gauge in the
tensioner mechanism. See Figure 44.
Figure 44
Syncrodrive Belt Tension Adjustment
• Loosen tensioner pulley nut (
1
) ½ to ¾ turn. See
Figure 45.
IMPORTANT
: Do not loosen tensioner pulley nut
(
1
) more than ½ to ¾ turn. If the nut is too loose
during the adjustment process, the belt tension
could increase when the nut is tightened back.
• Loosen lock nut (
2
) on Belt Tensioner adjusting
bolt. See Figure 45.
• Rotate Belt Tensioner adjusting bolt (
3
) to raise
or lower belt tension. See Figure 45.
Figure 45
• Tighten tensioner pulley nut (
1
) back to 55 Nm
(38 lb-ft) of torque. See Figure 45.
• Verify tension adjustment. Repeat previous
steps if tension is found insufficient.
SLIDE
TENSION GAUGE
TO
BELT OUTER EDGE. PUSH BELT
WITH
THUMBS
THE WIDTH
OF THE
TENSION GAUGE
Содержание SnowMX 2021
