26.
27.
12MM X 142MM DROPOUTS
Axle nut and retaining hardware. This system
allows for clocking of the skewer lever for easy,
consistant removal and replacement of the rear
wheel.
With the rear wheel installed close the quick
release lever to the proper tension and in the
desired orientation. install the retaining hardware.
You may need to open and slightly reposition the
skewer to allow the retainer to fit into the groovs
on the nut.
Onve this process is complete you will be able
to remove your axle and replace it in the same
orentation every time.
02.
01.
03.
