5
ASSEMBLY STEPS
High pressure hose connection
Connect the pressure hose to the machine’s outlet, ensuring it is
connected firmly.
See picture 1
Gun connection
Connect the gun lance(Fixed brush/turbo lance) to the gun stock. Turn the gun lance clockwise
until it locked in position. Connect the hose to the thread of gun stock by spanner. Check that
the seal ring is properly seated.
See Picture 2
Picture 2
Inlet hose connection
Picture 1
1. Connecting water hose to inlet, make sure
it is connected firmly. Do not turn on the machine at
this moment.
2. Turn on the tap, ensuring the inlet water pressure
range is between 0.01Mpa and 0.3Mpa.
3. Pull the trigger till all the air is pushed out of
machine and water flows from the gun which
means the pump is full of water.
4. Then you can turn on the switch.
See picture 3.
Picture 3
outlet
Water hose
Quick connector(Option)
