Yedoo Wzoom New, Руководство пользователя

Страница: 4 / 19

7 6
EN EN
Installation manual
2. 3. 1.
4.
Make sure that the pad tip fits into the
correct slot and then tighten both nuts.
First check that the front fork of the
scooter is aligned correctly (the V-brake
shoulders should be pointing forwards
towards the front of the scooter), then
release the brake cable from the guide. Insert the wheel into the front fork so it
is exactly in the middle.
Caution: When
inserting the wheel, ensure that the
arrow on the tyre sidewall points in the
direction of rotation when the scooter
is rolling forwards.
6
5.
Handlebars installation
First loosen the stem screw, then install
the handlebars into the position as seen
in the picture, then tighten the screws
only slightly so you can adjust the angle
of the handlebars later on.
(This step applies only for models
Wzoom and Tidit)
6.a
Insert the stem into the frame tube of
the scooter and adjust the handlebar
height taking care not to position it
above the marked line, see pic. 6.b.
Make sure that the handlebars are
straight and then tighten the screw
on the stem.
More information from the
world of scooters and the list
of distributors can be found at
www.yedoo.eu.
Introduction
We recommend that you entrust the installation, adjustment
and regular maintenance to a specialist bicycle shop. Improper
intervention can lead to damage of the scooter or to an accident
with serious health consequences.
If you are technically capable, do not worry; this manual
contains all the information you need to help you assemble
your new scooter.
Send your questions, comments and suggestions for
improvement of our products by e-mail to: info@yedoo.eu.
The installation is the same for
all three models (Wzoom, Tidit, Mau),
it differs only in minor details
(see additional pictures).
Installing the front wheel
Loosen both nuts
Direction
of rota-
tion